| |
Modular Tac-Vest
The Modular Tac-Vest is part of our Modular Pocket Series. The Modular
Pockets attach with MALICE clips which are woven onto the carrier. This
lacing system is very strong and secure. The pouches do not hang or
bounce, and each pocket can be removed in only a few seconds. This enables
the user to mix and match pockets, and configure their arrangement to
fit their particular mission. The vest body is built out of heavy-duty
breathable nylon mesh and is constructed using double needle stitching
for maximum durability. The Modular Tac-Vest is available in OD, Black,
or Tan.
Price: $90.00
|
|
Tac Vest 1A Rifle
The 1A "Rifle" is the most popular vest in our Tac series.
It will accommodate the individual who needs to carry lots of ammo.
The pocket design also makes it one of the most versatile vests on the
market. It is well suited to numerous activities from SWAT to hunting.
The vest adjusts quickly, allowing it to be worn over heavy clothing.
Pocket configuration: (2) Rifle Mag Pockets, (2) Medium Utility, (2)
Map Pockets, (1) Cuff Pocket, (2) Back Utility, and (1) Hydration Pocket.
It is available in OD, Black,Tan, or Camo.
Price: $130.00
|
|
Tac Vest 1B Utility
The 1B is very popular among reaction team members. This vest has a
pocket for everything. The large utility pocket can hold tools, ammo,
flash bangs, medical supplies, or food. There is plenty of space to
hold all the gear you need to accomplish your mission. As with all our
gear, this vest is built to be "bomb proof" and it is guaranteed
for life. Pocket configuration:(1) Rifle Mag pockets, (2) Large Utility,
(2) Medium Utility, (2) Map Pockets, (1) Cuff Pocket, (2) Back Utility,
and (1) Hydration Pocket. It is available in OD, Black, Tan, or Camo.
Price: $130.00
|
|
Tac Vest 1C Shotgun
The 1C allows the Breecher to carry all of his or her shotgun ammo on
their vest for immediate access. The 1C has heavy-duty elastic loops
to hold 24 shotgun shells. There is a removable flap that covers the
shells when not needed. Additionally, you can still carry AR-15 or MP5
mags, flash bangs, or even your radio in the other pockets. Pocket configuration:
(1) Shotgun Panel, (1) Rifle Mag Pocket, (2) Medium Utility, (2) Map
Pockets, (1) Cuff Pocket, (2) Back Utility, and (1) Hydration Pocket.
It is available in OD, Black, or Camo.
Price: $130.00
|
|
Tac Vest 1D 37mm
The 1D is designed for the "Gas Man". it has enough room to
carry all the needed rounds one might require during a civil unrest.
This vest has pockets to carry eight 37mm rounds, plus three rifle mag
pockets which can also be used to carry additional gas. The back of
the vest also has a hydration pocket for water. Sides Pocket configuration:
(1) 37mm panel, (1) 37mm Patch, (1) Rifle Mag Pocket, (1) Medium Utility,
(2) Map Pockets, (1) Cuff Pocket, (2) Back Utility, and (1) Hydration
Pocket. It is available in OD, Black, or Camo.
Price: $130.00
|
|
Tac Vest 1E Pistol
This vest is for the person who needs their sidearm close for immediate
access. It has a heavy duty holster and triple pistol mag pouch attached
to the front of the vest. The holster has an adjustable thumb break
for secure retention. The flaps on the pistol mag pocket are adjustable
so that they can be fitted for various sizes of mags. Pocket configuration:
(1) Holster,(1) Pistol Mag Pocket, (1) Rifle Mag Pocket, (1) Medium
Utility, (2) Map Pockets, (1) Cuff Pocket, (2) Back Utility, and (1)
Hydration Pocket.It is available in OD, Black, Tan, or Camo.
Price: $140.00
|
|
|
Tac Vest 1F Medic
The 1F was designed at the request of a tactical medic. The idea was
to carry all needed medical gear on the vest, rather than in a pack.
When needed, the medic can simply reach into a pocket to get their gear,
rather than stopping to remove a pack. This vest has three pockets designed
to carry medical supplies. It also has one zippered pocket large enough
to carry a 1000ml I.V. bag plus a starter kit and other supplies. There
are two 6 x 6 x 2 multi-purpose pockets for other supplies. Additionally,
you can still carry AR-15 or MP5 mags, flash bangs, or even your radio
in the rifle pockets. This vest is fully adjustable.Pocket configuration:(1)
Large Zipper, (2) Small Multi-Purpose, (1) Rifle Mag Pocket, (2) Map
Pockets, (1) Cuff Pocket, (2) Back Utility, and (1) Hydration Pocket.
It is available in OD, Black, Tan, or Camo.
Price: $130.00
|
|
|
MAV Bib
This bib plugs into your 1 piece Modular Assault Vest and provides 1/3
more area to attach pouches. It also provides an additional map pocket.
The bib attaches to the existing strap on the MAV and requires no modifications
or special hardware. (To be used with 1piece MAV. Pockets sold seperately)
Available in OD, Camo, or Tan.
Price: $28.50
|
|
MAV Center Adapter
Our center adapter was designed to fill the space between the connecting
buckles on our MAV 2 piece vest. The connector attaches to each side
of the webbing on the MAV vest and will velcro together.This adapter
allows you to add another pouch to the space where the buckles connect,
as well as providing an alternate way of closing the vest. Our connector
may also be attached to any PALS type of vest to hold an additional
pouch or to provide an alternate method of closure. Available in OD,
Black, and Tan.
Price: $18.00 |
|
MAV Vest Body
Available in a one-piece unit or a two-piece unit, these vest bodies
will accept any of our modular components. Each has 1.5" adjustable
shoulder straps and a waist strap. Both models have a Velcro opening
between the buckles, giving the user access to a large pocket. The one-piece
unit gives the wearer maximum room for pocket placement. The-two piece
unit (shown) is easier to put on, and may be opened up when going prone
for long periods of time. The vest is constructed from 1000 denier Cordura
nylon and Mil-spec webbing. Available in OD, Black, Tan, or Camo.
Price: $47.00 - 57.00
|
|
MAV Vest Complete
Another item in our Modular Series, The Modular Assault Vest may be
purchased as a complete unit, or as individual pieces. A complete MAV
comes with the following: one vest body, four triple 30 rd. AR-15 mag
pockets, two large utility pockets, and two small utility pockets.
The MAV comes in either a one piece (shown) or two piece model. Both
have 1.5" adjustable shoulder straps and a waist belt. There are
quick disconnect buckles up front, so the MAV can be "ditched"
in a hurry. The vest body also has a velcro pocket for storing maps
or survival gear.
All MAV components are constructed from 1000 denier Cordura nylon for
maximum durability. All seams are double stitched with nylon thread.
The MAV and modular pockets are available in OD, Black, Camo, or Tan.
Price: $170.00
|
|
Modular Panel Carrier
The Modular Panel Carrier Designed to accept panels from a ballistic
vest. The carrier unzips and the user inserts their panels into the
carrier, giving the user ballistic protection as well the ability to
carry any type of accessories that they wish to add. The Modular Panel
Carrier will accept any of our Modular Pockets giving on the ability
to "custom design" the layout of their vest.
The vest is a two piece style that connects on the sides with four quick
release buckles, the vest also adjusts in the shoulders so the hang
of the vest can be set by the user. There is also a drag handle on the
back. There is a pocket on the inside front of the vest for a standard
sized trauma plate. Once ballistic panels are inserted into the carrier
and pockets are attached, the vest goes on over the head and the four
side buckles are snapped together and cinched down. The vests are available
in Black, Tan, or OD. (pockets not included).
Price: $120.00 |
|
Modular Plate Carrier
Our plate carrier will hold most hard armor plates. It is adjustable
in the shoulder as well as on the sides. It has removable shoulder pads,
adjustable fastex buckles up front, and on the sides so it can be quickly
sized or removed. The front and back are covered with PALS webbing so
it will accept any modular pockets. The carrier will hold a plate up
to 11" x 14". It is available in OD, Black and Tan.
Price: $95.00 |
|
|
Modular Plate Carrier
Our plate carrier will hold most hard armor plates. It is adjustable in
the shoulder as well as on the sides. It has removable shoulder pads,
adjustable fastex buckles up front, and on the sides so it can be quickly
sized or removed. The front and back are covered with PALS webbing so
it will accept any modular pockets. The carrier will hold a plate up
to 11" x 14". It is available in OD, Black and Tan.
Price: $95.00
|
|
|
Plate Carrier Side Upgrade
This kit is an upgrade to our Plate Carrier and will allow the user to
add more pouches as needed. The kit includes (x1) one left side, (x1)
one right side, and (x2) two buckles. The Sides attach to the front of
a Plate Carrier with one long Malice Clip. The user can determine the
placement of the Sides which will add between 2 - 5 channels off the
sides from the Plate Carrier. Available in OD, Black, Tan, ACU, or MultiCam..
*Plate Carrier, Pouches, and Mod Padded Belt not included.
Price: $50.00
|
|
X Harness
This harness was designed to work in conjunction with our Modular Assault
Vest (MAV). It plugs into the existing shoulder straps on the MAV. The
X Harness is ergonomically designed to provide maximum comfort. It is
padded with .25" foam and features a drag handle on the back. There
is PALS webbing on the front and back so modular pouches can be added.
The modular X harness is available in OD, Black, Tan, or Camo.
Price: $30.50
|
