|
2 Mag 5.56 Pouch
Designed to hold two(2) M16 30rd magazines. The pouch will also hold
two(2) 12ga shotgun rounds. Magazines are retained by velcro flap and
Bungee retaining cord. Available in OD and Tan.
Price: $17.00 |
|
3 Mag 5.56 Panel
Designed to hold three (3) M16 30rd magazines.. Magazines are retained
by Bungee retaining cord.
Available in OD, Tan, Woodland camo.
Price: $30.00 |
|
40mm 4rd Panel
Our 40mm Panel will hold 4 rounds of HE or Illumination ammo. The panel
can be attached to a vest or belt or any of our modular carriers using
our MALICE clips. The flaps close with velcro and adjust to hold illumination
rounds. Each 40mm panel comes with two MALICE clips to attach to any
carrying platform. This panel is available in OD, Tan, or Black.
Price: $26.50 |
|
45 Degree Panel
This adapter allows you to mount a holster or any other MOLLE style
pouch at a 45 degree angle. It's ambidextrous, allowing you to angle
your holster or pouch to the left or to the right. Attaches to your
vest using Malice clips for a secure connection. The 45 Degree Adapter
is available in OD, Black, or Tan.
Price: $25.00
|
|
5.56/.223 Single Mag Pouch
Our single mag pouch will securely hold one thirty round metal 5.56
mag. Our pouch features an open top that has an adjustable retention
strap. This strap will securely hold your loaded mag in place and allow
you to quickly and quietly remove it. Our pouch has PALS/Modular webbing
on the front and back of the pouch allowing you to stack two pouches
on top of each other or to add other modular pouches on top of it. This
gives you the flexibility to "Layer" pouches . Because of
it versatile design and adjustable retention strap you can securely
carry a pistol in this pouch. This mag pouch will securely hold a 1911,
Beretta-92 or a Glock pistol. The design of the retention strap will
not allow the pistol to accidentally come out until it is deliberately
removed. The pouch will attach to any MOLLE, RACK, INTERCEPTOR or Strike
gear as well as to all Tactical Tailor gear using two Malice Clips (included
with pouch). They are available in the colors of OD, Black, or Tan.
Price: $14.00
|
|
5.56/.223 Triple Mag Pouch
The Three Mag Rifle Pocket will hold three 30 round .223/5.56 magazines.
The pouch is made from 1000 Denier Cordura nylon and the inside is lined
for maximum durability. The pocket closes with Velcro and has our cinch
system. The cinch system allows to tighten down the pocket so the mags
do not rattle. This pocket uses our MALICE clip attaching system and
can be securely attached to most all types of tactical gear. Available
in OD, Black, Tan, or Camo. Measures 7" x 2.5" x 3".
Price: $17.00
|
|
7.62/.308 Double Mag Pouch
This pouch will hold 2-20 round 7.62 mags or will hold 2 G36 mags. Closes
with and adjustable fastex buckle. Will attach to any of our modular
gear, MOLLE or ALICE gear using our MALICE clips, two included with
each pouch. Features our cinch system to tighten pocket.Available in
OD, Black, Camo, or Tan. Measures 5.5" x 2.5" x 3".
Price: $17.00
|
|
7.62/.308 Single Mag Pouch
Our single mag pouch will securely hold one metal twenty round 7.62x51
(.308) mag. It will accept M-14, HK-91, FAL and most all other rifle
mags. Our pouch features an open top that has an adjustable retention
strap. This strap will securely hold your loaded mag in place and allow
you to quickly and quietly remove it. Our pouch has PALS/Modular webbing
on the front and back of thepouch allowing you to stack two pouches
on top of each other or to add other modularpouches on top of it. This
gives you the flexibility to "Layer" pouches . The pouch will
attach to any MOLLE, RACK, INTERCEPTOR or Strike gear as well as to
all Tactical Tailor gear using two Small Malice Clips (included with
pouch). 4" x 4" x 1". They are available in the colors
of OD, Black, Tan.
Price: $14.00
|
|
90 Degree Panel
This adapter allows you to mount a holster or any other MOLLE style
pouch at a 90 degree angle. Attaches to your vest using Malice clips
for a secure connection. Examples: One 3 Mag 5.56 Pouch (or similar
sized pouch) will mount horizontally, or one 40mm 4rd Panel (or similar
sized pouch) will mount horizontally. The 90 Degree Adapter is 3"
x 6" (or 6" x 3") and is available in OD, Black, or Tan.
Price: $15.00
|
|
Accessory Pouch 1
The Accessory Pouch is available either as a vertical or horizontal
pouch. Both pouches feature a zipper closure with dual pulls. The vertical
pouch (1V) measures 7"H x 4.5"W x 2"D, the horizontal
pouch (1H) measures 4.5"H x 7.5"W x 2"D. Pouch 1V attaches
with two long Malice clips and Pouch 1H attaches with two short Malice
clips. Both pouches are available in OD, Black, and Tan.
Price: $12.50
|
|
AK Double Mag Pouch
Holds two 30-round AK mags or will hold 3-30 round 5.56 mags. Closes
with an adjustable fastex buckle. Will attach to any of our modular
gear, MOLLE or ALICE gear using our MALICE clips (two included with
each pouch). Available in OD, Black, Tan, or Camo.
Price: $21.00
|
|
Canteen Utility Pouch
This utility pouch is designed as a general purpose pouch that will
fit a standard 1qt canteen (without cup) or most 1ltr watter bottles.
It has an adjustable quick release buckle, Velcro closure, and attaches
with two long Malice Clips (included). The pouch measures 8.5"H
x 5"W x 3"D. Available in OD, Black, and Tan.
Price: $20.00
|
|
Dump/Demo Pouch
The Dump Bag was designed to hold empty magazines or demolition charges.
The bag has an adjustable belt hanger and two removable leg straps.
The hanger and leg straps can be removed and the bag be worn on a belt.
There are elastic lips sewn into the opening of the bag to help prevent
items from coming out. There is PALS webbing on the side of the bag
so accessories can be added. The Dump Bag is constructed of 2ply fabric
and double stitched for extra long life. The bag is available in OD,
Tan, or Black. It measures 8.5" x 6.5" x 4".
Price: $37.00
|
|
Flashbang/Smoke Pouch
This pouch will hold a military smoke grenade or most any style of distraction
device. The pouch is made from Cordura nylon andit is lined for extra
reinforcement. The pouch closes with an adjustableFastex buckle. The
pouch can be attached to almost any belt, vest orpack using our new
MALICE Clip System. Each pouch comes with two clips. OD, Camo, Tan,
or Black. Measures 6.5" x 2.75" x 1.5".
Price: $15.00
|
|
Gas Mask Carrier
We have two sizes to accommodate most masks. Our mask carriers aremade
from Cordura Nylon and have foam padding on the inside to protect the
mask. The carrier closes with three strips of velcro. These carriers
are designed to attach horizontally to a Modular Leg Rig, Modular Vest,
or any belt using our Malice Clip Attaching System (2 Malice Clips included).
Available in OD or Black. Measurements are: Medium (9" x 5"
x 4"), and Large (9" x 8" x 4").
Price: $27.50 - 32.50
|
|
Grenade Pouch
The pouch is designed to hold one fragmentation grenade. It attaches
with two small Malice Clips and securerly closes with a fastex buckle.
The inside of the pouch has webbing loops for the grenade spoon to help
keep it in place and prevent shifting or rotating. Available in OD,
Tan, or Camo. Measures 3.5" x 2.5" x 2.5".
Price: $15.00 |
|
Hydration Carrier
We have designed out MHC to hold up to a 3 Liter hydration bladder.
The MHC will securely attach to our X-harness or any MOLLE/Pals system.
Our MHC has modular attachment points on the front as well as the back,
this unit comes with four (4) small Malice clips so it can be attached
to your gear. They are available in the colors OD, Black, Camo, and
Tan. The approximate measurements are 17" x 6.5" x 2.5".
Note: Hydration reservoir is NOT included.
Price: $35.00
|
|
Knife Pouch
Our Knife Pouch will hold a large sized folding knife, SureFire flashlight,
or an extra pistol Mag. The flap adjusts so the pouch can be sized to
fit the contents. The pouch can be attached to almost any piece of tactical
gear using our MALICE clip attaching system (one clip included). Available
in OD, Black, or Tan. Measures 5" x 1.5" x 1".
Price: $10.50
|
|
Large Utility Pouch
This pocket is large enough to hold a canteen or large water bottle.
It has an adjustable quick release buckle and Velcro closure. The pouch
has two rows of modular webbing towards the bottom of the pouch for
attaching smaller pockets. It can be attached to any of our modular
gear or a belt using our MALICE clips (provided with pouch). Available
in OD, Black, Tan, or Camo. Measures 11" x 5.5" x 2".
Price: $24.50
|
|
Malice Clips
Malice Clips (Pat# 6823566) are reusable, high strength, injection molded,
connecting clips that were designed to attach modular pockets to vests,
belts, packs, MOLLE or SPEAR equipment. They are not affected by heat
or cold, and will never corrode or lose their subdued finish. Once attached
they require a flat tipped object (a screwdriver, car key, knife point,
bullet point, ball point pen) to be inserted into the opening slot on
the back of the clip to unlock it. The clip will not open until it is
disengaged by the user.
Price: $4.00 (package
of four)
|
|
Medic Pouch
This pouch was built for some of our customers in the Special Operations
community. It was designed to be worn on a belt, vest or pack. If needed,
the operator un-snaps the fastex buckle and simply yanks the pouch open
to reveal the medical supplies (not included). The pouch features two
mesh pockets with draw string closures, stacked on top of each other,
the mesh pocket for securing medical gear. We have sewn in a piece of
cord on top of the pouch so a roll of tape can be tied in. The pouch
zips completely closed and has a hooded flap to cover the top. An adjustable
fastex closure insures the pouch and contents remains secure until needed.
We have sewn on a black cross on top to signify that it is a medical
pouch. This pouch is completely adaptable to any MOLLE, SPEAR, PALS
gear or any type of belt. It can be attached to any gear by our Malice
clip system, two are included. The outside of the pouch is made from
1000 denier cordura nylon and the inside is lined with pack cloth. It
closes with a heavy duty coil zipper with dual pulls. This pouch is
approximately 9" x 6" x 3", and it's convenient size
makes it perfect for medical gear, as an E & E, or for any number
of other uses. This pouch is available in OD or Tan.
Price: $41.50
|
|
Modular Buttpack
The Modular Butt Pack has numerous pockets and compartments to store
you gear. It has three outside pockets that have Fastex closures and
one top zipper pocket. On the inside flap there is a zipper map pocket
and the main compartment has a drawstring closure. This butt pack can
be attached to any belt or Modular system using our Malice Clips (2
included). It is constructed from 1000 Denier Cordura Nylon and heavy
duty nylon webbing. It is available in the colors Olive Drab and Tan.
Price: $75.00
|
|
MP5 Double Mag Pouch
Will hold two 30rd 9mm MP5 Magazines. Available in OD, Black, and Tan.
Call for price
|
|
Multi-Purpose Pouch
This medium sized pouch is designed for miscellaneous gear. It measures
7" x 7" x 2" and closes with an adjustable Fastex buckle.
There is a small Velcro flap pouch on the front for separating small
items such as a compass or handcuffs. Comes with two MALICE clips. Available
in OD, Black, Tan, or Camo.
Price: $23.00
|
|
Pistol Mag Pouch
Our pistol mag pouches are designed to fit almost any size mag. Each
pouch has an adjustable Velcro flap so it can be independently sized
to fit it's contents. Each pouch also contains a Kydex retention clip
to securely hold mags until they are pulled out. These pouches will
attach to almost any style of belt or tactical gear using our MALICE
Clip system. The mag pouches are available in double and triple configurations.
The pouches are constructed from 1000 denier Cordura nylon for maximum
durability. Available in OD, Tan, or Black.
Price: $27.00 - $30.00
|
|
Radio Pouch Large
This radio pouch was designed to hold several different models to include
the PRC-148 MBITR. The pouch will attach to any MOLLE, RACK, or PALS
gear as well as to all Tactical Tailor gear using two Malice Clips (included
with pouch). Our radio pouch features an open top for ease of adjustment
of the control knobs, it also has a flip up cover to hide the key pad
and screen if desired. The pouch is adjustable allowing it to carry
various different makes of radios such as MBITR, Saber, HT-1000, HT-600
and the ICOM-F3S to name a few.This pouch will hold a radio up to the
following size: 3" wide by 9.5" tall by 1.75" thick.
They are available in OD, Tan, and Black.
Price: $22.50
|
|
Radio Pouch Small
The pouch adjusts to fit most all small radios as well as most GPSs.
It adjusts by a Velcro wrap up to 3 wide by 2 deep by 5 tall. It features
an adjustable fastex closure for quick and silent removal of your equipment.
This pouch can be mounted to a belt, pack or any other current modular
kit. It comes with one Malice clip for secure attachment to your gear.
The Modular Radio Pouch Small is available in OD, Black, and Tan.
Price: $17.50
|
|
SAW Pouch
The pocket will hold a 200 round SAW drum or 150 linked rounds of 7.62.
The SAW Pouch is made from 1000 denierCordura nylon and lined with plastic
reinforcement to provideextra security of a heavy load. This pouch can
be attached toalmost any piece of tactical gear using our MALICE clips
(2 come with pouch). Available in OD, Tan, or Camo. Measures 8.5"
x 7.5" x 2.5".
Price: $27.00
|
|
Shotgun 6rd Panel
We have redesigned our Shot Shell Holder to hold 6 rounds. This size
makes it possible to mount it on the front of our Single Mag 5.56 pouch
or other pouches. It comes with 2 MALICE clips so it may be attached
to any belt, pack or modular gear. Available in OD, Black, or Tan.
Price: $15.00 |
|
Small Utility Pouch
The Small Utility Pocket will hold a compass, first aid dressing or
other small items. Closes a with Velcro and snap . It is made from Cordura
nylon fabric and has a grommet drain hole. Comes with two MALICE clips.
Available in OD, Black, Tan, or Camo. Measures 5" x 3" x 2.5".
Price: $11.00 |
|
Strobe/Compass Pouch
Our Strobe/Compass Pouch will hold the new and old Military strobe lights
or a compass. The pouch has a grommet hole in the top for tying in a
dummy cord. The pouch is made from Cordura nylon and closes with an
adjustable Fastex buckle. The pouch can be attached to almost any belt,
vest or pack using our new MALICE Clip System. Each pouch comes with
two clips. Available in OD, Camo, Black, or Tan. Measures 5" x
2.75" x 1.25".
Price: $14.00
|
|
Zipper Utility Pouch
Our Zippered Utility Pouch measures 7" x 5" x 4". It
was designed to hold medical supplies (500ml IV bag, 2 rolls of Kerlix
starter kits, ace wrap, etc.) but it will also hold a 1 quart GI canteen
or a Nalgene bottle. There are elastic loops on the inside of the pouch
to keep the contents secure. The pouch is made with heavy duty Cordura
nylon fabric and YKK zippers. The pouch can be attached to almost any
style of tactical gear by using our MALICE clip attaching system ( 2
are included). The Pouch is available in OD, Black, Tan, or Camo.
Price: $23.50
|
|
PVS-14 Hard Case
We are proud to introduce a PVS-14 hard case that is slim-line and impact
resistant. The case in made from an injection molded high impact plastic
to protect your NVG's. This case will securely hold your PVS-14 with
the head mount attached. The PVS-14 will snugly fit into this case with
no slop or rattle. The case has an internal battery compartment that
will hold two AA batters in-place, to insure you always have a fresh
set when you got out on your night mission. The lid securely closes
with a snap and there is a slot in the back so you may "Dummy Cord"
the goggles directly to you while they are still securely protected
in the case. This case will attach to any Interceptor vest, MOLLE, SPEAR,
RACK or any Tactical Tailor gear using two Malice Clips that come with
the case. They are available in black only.
Price: $44.00
|